Contact Don at dspru@aol.com for
an exact quote on any items at this site.
All prices shown are
"Factory Direct" prices with No Sale Taxes to all non Idaho residents.
All prices subject to change without notice. For comparison shoppers: Call Don at 1-800-450-0250
with your best price and be
ready for a surprise!
PROLINE BRAND MINING EQUIPMENT
We
feature 2 types of Proline Equipment on this site. In our showroom we do carry or have access to
every item Proline sells.
HIGH BANKER DREDGE COMBOS
NEW Proline Big Banker Dredge
Combo
The Proline big banker has a 30" by 40" hopper. The sluice is 22" by
72" and is powered by a 8 hp Honda that runs a HP500 pump. This is a
picture of the unit next to there 2" combo. Works very well on fine
gold.
ENGINE - 8hp Honda
w/HP500 pump; SLUICE BOX - 22" X 72"; (A HIGH BANKER
ONLY)
$3,725.00
Proline 2 inch High Banker Dredge
Combo This is the
most popular of the combo family. Powered by the 2.5hp Honda and
Prolines new H.P.100 pump and weighing only 56 lbs. makes this high
performance unit easy to transport in and out of your mining
operation. The 2" combo is capable of processing in excess of two
cubic yards of material per hour as a dredge and can be continuously
fed with a small shovel as a high banker. This is one of the most
powerful 2" combos on the market today and it's more capable of
putting in a day's work on the gold-rich gravel bars.
2" Combo unit only $935.00
ENGINE - 2.5hp Honda
w/HP100 pump; SLUICE BOX - 10" X 36"; JET - 2" X 1.5" slip; SUCTION
HOSE - 2" X 10'; DREDGE PRESSURE HOSE - 1.5" X 8'; HIGH BANKER
PRESSURE HOSE - 1.5" X 25'; DREDGE CAPACITY - 2 yards per hour;
WEIGHT - 56 pounds
$1475.00
Proline 2.5 inch High Banker Dredge
Combo This is the
dredge high banker combo to really consider taking into those tough
to get spots. The 2.5" combo weighs in at under 100 lbs. but is the
choice of the professional dredger. This unit is powered by a 4hp
Honda turning the Proline H.P.175 pump. As a dredge the 2.5" combo
is capable of processing in excess of five cubic yards of material
per hour, and it's the smallest combo that will handle a continuous
feed with a #2 shovel. This is the only 2.5" combo on the market
that will run a diving compressor and still have suction power to
spare. TOP
2.5" Combo unit only $1225.00
ENGINE - 4hp
Honda w/HP200 pump $1975.00
Proline 3 inch HighBanker Dredge
Combo This 3"
combo is truly the prospectors dream. It's powered by the Proline
HP300 pump and a 5.5hp Honda. The 3" combo is capable of processing
in excess of eight cubic yards of material per hour as a dredge and
can handle a continuous feed by three men shoveling as a highbanker.
This combo was designed with an extra large hopper for a greater
capacity of material and it's twin, triple-row spray bars use high
pressure to thoroughly wash bank material. Just like the 2.5" combo,
this unit can also have diving capabilities by simply adding an air
compressor. This combo is really in a class by itself.
3" Combo unit only $1300.00
ENGINE -5.5hp Honda w/H.P.300 pump
$2255.00
SLUICE BOX - 14" X 48"; JET - .3" X 1.5" thread;
SUCTION HOSE - 3" X 15'; DREDGE PRESSURE HOSE - 1.5" X 10'; HIGH
BANKER PRESSURE HOSE - 1.5" X 50'; DREDGE CAPACITY - 8 yards per
hour; WEIGHT - 155 POUNDS
FLAIR DREDGES
Proline 2 inch Flair Dredge There is
simply no other small dredge on the market today that can equal the
Proline 2" flair dredge for it's quality or performance. This
serious little dredge is now powered by the 2.5hp 4 stroke Honda and
H.P.100 Proline pump. This is a dramatic increase over the old 2
stroke version. Combine this with Proline's renown jetting system,
full flared hopper, low-lift sluice box, new and improved removable
"Hungarian riffles" with miner's moss, and you have one of the most
powerful and efficient small dredges ever created. The rugged
cross-link polyethylene plastic floatation has been recently
improved for superior swift water stability and strength. The sturdy
steel frame has been revised as well, in a stronger, lighter design.
A knockout rod is supplied in case you get a plug in the suction
hose.
ENGINE - 2.5hp 4 stroke
Honda w/H.P.100 pump $1385.00
SLUICE BOX - 10" X 30"; JET - 2" X 1.5" slip;
SUCTION HOSE - 2" X 10'; FLOATATION - 7"X26"X47"(cross-link
polyethylene); DREDGE CAPACITY - up to 2 yards per hour; WEIGHT - 59
pounds
Proline 2.5 inch Flair Dredge
ENGINE - 2.5hp Honda
w/H.P.100 pump $1725.00
ENGINE - 4hp
Honda w/H.P.200 pump $1950.00
ENGINE - 4hp
Honda w/H.P.200 pump $ T-80 Air $2250.00
Proline 3 inch Flair Dredge The 3"
Proline flair dredge is a 3" version of the 4" flair dredge. This
unit was developed for the person who wanted power enough to go deep
and move a lot of material but still stay on his budget. Like the
4", this models frame is elevated, allowing each side to be grabbed
like a handle or pass a rope through to anchor the dredge down. The
frame is also collapsible to make transporting easier. Powered by a
5.5hp Honda and Prolines H.P.300 pump makes this one of the most
powerful 3" dredges on the market. The jetting system is in a class
by itself. Just like the larger Proline dredges, the 3" uses a one
piece flair and jet design and are larger internally than a 3" hose.
This is where Proline introduces there exclusive "Sure Flow Coupler"
which holds the hose securely to the jet without distorting it,
making it practically impossible to get a surface plug. The 3" also
has a "Wave" classifier which causes a jigging action in front of
the sluice allowing the heavy values to concentrate under the
classifier, while lighter material works it's way out of the box.
Hungarian riffles are used for efficiency, and miner's moss is used
throughout the sluice. TOP
ENGINE - 5.5hp
Honda w/H.P.300 pump $2385.00
SLUICE BOX - 14" X 48"; JET - Specialized unit for
Proline 3" 1.5" thread; SUCTION HOSE - 3" X 15'; FLOTATION -
12"X43"X66" (cross-link polyethylene); DREDGE CAPACITY - 8 yards per
hour; WEIGHT - 160 pounds
ENGINE -5.5hp Honda
w/H.P.300 pump & T-80 Air $2685.00
Proline 4 inch Flair Dredge The 4"
Proline flair dredge was designed for processing large amounts of
material. The 4" dredge has always been a popular size due to it's
capabilities, ease of operation, and portability. The 4" Proline
frame is elevated, allowing each side to be grabbed like a handle or
pass a rope through to anchor the dredge down. The frame is also
collapsible, making transporting easier. Powered by a 5.5hp Honda
engine and the Proline H.P.350 pump makes this 4" dredge one of the
most powerful on the market today. The jetting system is in a class
all by itself. The flair and jet are a one piece design and are
larger internally than a 4" hose. This is where Proline introduces
there exclusive "Sure Flow Coupler" which holds the hose securely to
the jet without distorting it, making it practically impossible to
get a surface plug. The 4" also sports a "Wave" classifier which
causes a jigging action in front of the sluice allowing the heavy
values to concentrate under the classifier, while lighter material
works it's way out of the box. Hungarian riffles are used for
efficiency, and miner's moss is used throughout the sluice.
TOP
ENGINE - 5.5hp Honda w/H.P.350 pump
(350 gpm); $2915.00
SLUICE BOX - 16" X 48"; JET - Specialized unit for Proline 4"
dredge-2" thread; SUCTION HOSE - 4" X 15'; FLOATATION - 11"X45"X75"
(cross-link polyethylene); DREDGE CAPACITY - 12 yards per hour; WEIGHT - 208 pounds
ENGINE - 5.5hp Honda w/H.P.350 pump &
T-80 Air 3215.00
ENGINE - 6.5hp Honda w/H.P.400 pump &
T-80 Air 3375.00
Proline 5 inch Flair Dredge It has been
proven time and time again that the more material you process, the
better your chance of recovering a substantial amount of gold. This
stands true for the 5" Proline flair dredge since it was designed
for processing large amounts of material. The 5" Proline frame is
elevated, allowing each side to be grabbed like a handle or pass a
rope through to anchor the dredge down. The frame is also
collapsible to make transporting easier. Powered with either twin
5.5hp Hondas and the Proline H.P.350 pumps or a single 8hp or 9hp
Honda with H.P.500 makes this one of the most powerful 5" dredges on
the market. The jetting system is in a class by itself. The flair
and jet are a one piece design and are larger internally than a 5"
hose. This is where Proline introduces there exclusive "Sure Flow
Coupler" which holds the hose securely to the jet without distorting
it, making it practically impossible to get a surface plug. The 5"
also sports a "Wave" classifier which causes a jigging action in
front of the sluice allowing the heavy values to concentrate under
the classifier, while lighter material works it's way out of the
box. Hungarian riffles are used for efficiency, and miner's moss is
used throughout the sluice. TOP
ENGINE - 9hp Honda
w/H.P.500 pump & T-80 Air $4530.00
SLUICE
BOX - 20" X 60"; JET - Specialized unit for Proline 5" duel 2"
thread; SUCTION HOSE - 5" X 20'; FLOATATION - 13"X54"X88"
(cross-link polyethylene); DREDGE CAPACITY - 16 yards per hour
Proline 6 inch Flair Dredge The 6"
Proline flair dredge has the power where you need it. This dredge is
for the serious dredger. This dredges frame is elevated, allowing
each side to be grabbed like a handle or pass a rope through to
anchor it down. Powered with twin 9hp Honda's and Proline's H.P.500
pump, makes this one of the most powerful 6" dredges on the market.
The jet and flair are a one piece design and are larger internally
than a 6" hose. This is where Proline introduces there exclusive
"Sure Flow Coupler" which holds the hose securely to the jet without
distorting it, making it practically impossible to get a surface
plug. The 6" also sports a "Wave" classifier which causes a jigging
action in front of the sluice allowing the heavy values to
concentrate under the classifier, while lighter material works it's
way out of the box. Hungarian riffles are used for efficiency, and
miner's moss is used throughout the sluice. The 6" also comes with
25' of suction hose for greater depth, and a 263 air compressor that
is capable of supporting 2 persons with the ease of breathing at
greater depths. TOP
ENGINES - Twin 9hp Honda's w/(2)H.P.500 pumps & T-80 Air
$7125.00
SLUICE BOX - 22" X 72"; JET - Specialized unit for Proline 6" duel
2" thread; SUCTION HOSE - 6" X 25'; FLOATATION - 15"X62"X100"
(cross-link polyethylene); DREDGE CAPACITY - 18 yards per hour
